资源类型

期刊论文 163

会议视频 3

年份

2023 10

2022 12

2021 8

2020 11

2019 15

2018 12

2017 9

2016 7

2015 5

2014 12

2013 4

2012 9

2011 4

2010 11

2009 5

2008 5

2007 13

2006 3

2004 3

2003 1

展开 ︾

关键词

人工智能 2

结构形式 2

6016 合金 1

6016 铝合金 1

Al-Cr203体系 1

Al2O3-MxOy 1

Al@AP/PVDF纳米复合材料 1

BNLAS 1

EBSD 1

EDI 1

Howard正则型 1

LC4CS 铝合金 1

Ni–Ti–Cu–V合金 1

Pt–Ba–Ce/γ-Al2O3 催化剂，物理化学性质，NOx存储和还原，NOx 排放，H2 还原剂 1

Si/Al 比值 1

TC4钛合金 1

X射线 1

一次二阶矩 1

万有引力定律 1

展开 ︾

检索范围：

排序： 展示方式：

A new regeneration approach to cation resins with aluminum salts: application of desalination by its

Zhigang LIU, Shaomin ZHU, Yansheng LI

《环境科学与工程前沿（英文）》 2012年 第6卷 第1期   页码 45-50 doi: 10.1007/s11783-010-0262-6

摘要： A novel method for the regeneration of cation exchange resins by aluminum (Al) salts was investigated in order to improve the regeneration efficiency of resins and reduce the dosage of regenerant. The influences of Al concentration and the pH of regeneration solution on resin transformation had been studied. The desalination experiments were carried out to evaluate the characteristics of the Al form resins. Experimental results showed that the regeneration rate of resins was strictly dependent on Al concentration and the pH of the solution. Compared to the conventional regeneration method, the Al form mixed bed exhibited the same desalination capability as the H form mixed bed (MB), and the total organic carbon (TOC) removal was up to 90%, clearly higher than that of the H form. Al salt solution could be utilized repeatedly to regenerate Al form resins.

关键词： aluminum (Al) form resins     desalination     mixed bed (MB)     regeneration    

HTML PDF 收藏

Fabrication of form stable NaCl-Al2O3 composite for thermal energy storage by cold sintering process

Bilyaminu Suleiman, Qinghua Yu, Yulong Ding, Yongliang Li

《化学科学与工程前沿（英文）》 2019年 第13卷 第4期   页码 727-735 doi: 10.1007/s11705-019-1823-2

摘要： A form stable NaCl-Al O (50-50 wt-%) composite material for high temperature thermal energy storage was fabricated by cold sintering process, a process recently applied to the densification of ceramics at low temperature ˂ 300°C under uniaxial pressure in the presence of small amount of transient liquid. The fabricated composite achieved as high as 98.65% of the theoretical density. The NaCl-Al O composite also retained the chloride salt without leakage after 30 heating-cooling cycles between 750°C–850°C together with a holding period of 24 h at 850°C. X-ray diffraction measurements indicated congruent solubility of the alumina in chloride salt, excellent compatibility of NaCl with Al O , and chemical stability at high temperature. Structural analysis by scanning electron microscope also showed limited grain growth, high density, uniform NaCl distribution and clear faceted composite structure without inter-diffusion. The latent heat storage density of 252.5 J/g was obtained from simultaneous thermal analysis. Fracture strength test showed high sintered strength around 5 GPa after 50 min. The composite was found to have fair mass losses due to volatilization. Overall, cold sintering process has the potential to be an efficient, safe and cost-effective strategy for the fabrication of high temperature thermal energy storage materials.

关键词： cold sintering process     composite fabrication     thermal energy storage     phase change materials    

HTML PDF 收藏

Fluorescence detection of phosphate in an aqueous environment by an aluminum-based metal-organic framework

《环境科学与工程前沿（英文）》 2022年 第16卷 第12期 doi: 10.1007/s11783-022-1594-8

摘要：

● A novel Al-MOF was successfully synthesized by a facile solvothermal method.

关键词： Fluorescence     Metal-organic framework     Phosphate     Detection     Al-MOF    

HTML PDF 收藏

铝电解用Fe-Ni-Co-Al2O3金属陶瓷惰性阳极

邱竹贤,石忠宁,徐君莉

《中国工程科学》 2004年 第6卷 第8期   页码 35-39

摘要： 阳极的反电动势为2.45 V，比理论分解电压仅高出0.25 V证明该阳极为惰性阳极，在电解槽中进行的是Al2O3的分解反应。

关键词： 铝电解     惰性阳极     反电动势    

HTML PDF 收藏

Separating method and dynamic processes of Nano-Al13

GAO Baoyu, YUE Qinyan, WANG Xiaona, CHU Yongbao, KONG Chunyan

《环境科学与工程前沿（英文）》 2007年 第1卷 第3期   页码 368-373 doi: 10.1007/s11783-007-0063-8

摘要： In order to investigate the characteristics of pure Nano-Al, Nano-Al was separated and purified from a series of poly-aluminum chloride (PAC) solutions which had the same Al percentage but different total Al concentrations, by using column chromatography, ethanol-acetone resolving and SO/Ba displacement. The Al species yield was characterized by Al-ferron timed complexation spectrophotometry and Al-NMR (nuclear magnetic resonance). The coagulation efficiency of Nano-Al, PAC and AlCl in synthetic water was also investigated by Jar tests. The dynamic process and aggregation state of kaolin suspensions coagulating with Nano-Al, PAC and AlCl were similarly investigated using a photometric dispersion analyzer 2000 (PDA2000). The experimental results indicated that the ethanol-acetone resolving method was simple and could separate the PAC solution at different concentrations, while column chromatography could separate PAC solutions at low concentrations. The SO/Ba displacement method could separate PAC solutions at high concentrations. However, extra inorganic cation and anion could be added in the solution during separation. The coagulation efficiency and dynamic experimental results showed that Nano-Al with high positive-charged species was effective in removing turbidity and color. The dynamic process results showed that Nano-Al also had the best recovery capability after shearing compared with PAC and AlCl because the Nano-Al conformation is more effective in charge neutralization.

关键词： displacement     PAC     coagulation efficiency     poly-aluminum     inorganic    

HTML PDF 收藏

Fatigue and impact analysis and multi-objective optimization design of Mg/Al assembled wheel considering

《机械工程前沿（英文）》 2022年 第17卷 第3期 doi: 10.1007/s11465-022-0701-7

摘要： The multi-material assembled light alloy wheel presents an effective lightweight solution for new energy vehicles, but its riveting connection remains a problem. To address this problem, this paper proposed the explicit riveting-implicit springback-implicit fatigue/explicit impact sequence coupling simulation analysis method, analyzed the fatigue and impact performance of the punching riveting connected magnesium/aluminum alloy (Mg/Al) assembled wheel, and constructed some major evaluation indicators. The accuracy of the proposed simulation method was verified by conducting physical experiments of single and cross lap joints. The punching riveting process parameters of the assembled wheel joints were defined as design variables, and the fatigue and impact performance of the assembled wheel was defined as the optimization objective. The connection-performance integration multi-objective optimization design of the assembled wheel considering riveting residual stress was designed via Taguchi experiment, grey relational analysis, analytic hierarchy process, principal component analysis, and entropy weighting methods. The optimization results of the three weighting methods were compared, and the optimal combination of design variables was determined. The fatigue and impact performance of the Mg/Al assembled wheel were effectively improved after optimization.

关键词： magnesium/aluminum assembled wheel     riveting residual stress     fatigue analysis     impact analysis     multi-objective optimization    

HTML PDF 收藏

Utilization of aluminum hydroxide waste generated in fluoride adsorption and coagulation processes for

Jiawei JU,Ruiping LIU,Zan HE,Huijuan LIU,Xiwang ZHANG,Jiuhui QU

《环境科学与工程前沿（英文）》 2016年 第10卷 第3期   页码 467-476 doi: 10.1007/s11783-015-0809-7

摘要： Although Al-based coagulation and adsorption processes have been proved highly efficient for fluoride (F) removal, the two processes both generate large amount of Al(OH) solid waste containing F (Al(OH) -F). This study aimed to investigate the feasibility of utilizing Al(OH) -F generated in Al(OH) adsorption (Al(OH) -F ) and coagulation (Al(OH) -F ) for the adsorption of cadmium ion (Cd(II)). The adsorption capacity of Al(OH) -F and Al(OH) -F for Cd(II) was similar as that of pristine aluminum hydroxide (Al(OH) ), being of 24.39 and 19.90 mg·g , respectively. The adsorption of Cd(II) onto Al(OH) -F and Al(OH) -F was identified to be dominated by ion-exchange with sodium ion (Na ) or hydrogen ion (H ), surface microprecitation, and electrostatic attraction. The maximum concentration of the leached fluoride from Al(OH) -F and Al(OH) -F is below the Chinese Class-I Industrial Wastewater Discharge Standard for fluoride (<10 mg·L ). This study demonstrates that the Al(OH) solid wastes generated in fluoride removal process could be potentially utilized as a adsorbent for Cd(II) removal.

关键词： Al(OH)3     fluoride     cadmium     adsorption     reclamation     sequential extraction    

HTML PDF 收藏

Toughening of vinyl ester resins by two-dimensional MXene nanosheets

《化学科学与工程前沿（英文）》   页码 1651-1658 doi: 10.1007/s11705-022-2208-5

摘要： Two-dimensional nanosheets are highly effective tougheners for vinyl ester resins. The toughening effect is related to the high specific surface area and unique two-dimensional planar structure of the nanosheets. In this study, a coupling agent γ-(2,3-epoxypropoxy) propytrimethoxysilane (Kh-560) was used to modify MXene nanosheets (M-MXene) for use in toughening vinyl ester resin. The mechanical properties, including the tensile strength, flexural strength, Young’s modulus and elongation, of neat vinyl ester resin and vinyl ester resin modified with MXene and M-MXene were investigated. The results showed that modification significantly improved the mechanical properties of the vinyl ester resin. The tensile and flexural strengths of the MXene-nanosheet-modified vinyl ester resin were 27.20% and 25.32% higher, respectively, than those of the neat vinyl ester resin. The coupling agent improved the interfacial compatibility between the MXene nanosheets and vinyl ester resin, which resulted in the tensile and flexural strengths of the M-MXene-nanosheet-modified vinyl ester resin being 52.57% and 54.60% higher, respectively, than those of the neat vinyl ester resin for a loading quantity of nanosheets of only 0.04 wt %, which is economically viable. The main mechanisms by which the nanosheets toughen the resin are crack deflection and crack pinning.

关键词： MXene nanosheets     2D material     vinyl ester resin     modification     coupling agent    

HTML PDF 收藏

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes

《化学科学与工程前沿（英文）》 2023年 第17卷 第5期   页码 504-515 doi: 10.1007/s11705-022-2260-1

摘要： Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors. However, the sustainable development of conventional phenolic resin has been challenged by petroleum-based phenol and formaldehyde. Lignin with abundant phenolic hydroxyl groups is the main non-petroleum resource that can provide renewable aromatic compounds. Hence, lignin, phenol, and furfural were used to synthesize bio-based phenolic resins, and the activated carbon nanofibers were obtained by electrospinning and one-step carbonization activation. Fourier transform infrared and differential scanning calorimetry were used to characterize the structural and thermal properties. The results reveal that the apparent activation energy of the curing reaction is 89.21 kJ·mol–1 and the reaction order is 0.78. The activated carbon nanofibers show a uniform diameter, specific surface area up to 1100 m2·g–1, and total pore volume of 0.62 cm3·g–1. The electrode demonstrates a specific capacitance of 238 F·g–1 (0.1 A·g–1) and good rate capability. The symmetric supercapacitor yields a high energy density of 26.39 W·h·kg–1 at 100 W·kg–1 and an excellent capacitance retention of 98% after 10000 cycles. These results confirm that the activated carbon nanofiber from bio-based phenolic resins can be applied as electrode material for high-performance supercapacitors.

关键词： lignin     bio-based phenolic resins     electrospinning     activated carbon nanofibers     supercapacitors    

HTML PDF 收藏

Combination form analysis and experimental study of mechanical properties on steel sheet glass fiber

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 834-850 doi: 10.1007/s11709-021-0743-7

摘要： The concept of steel sheet glass fiber reinforced polymer (GFRP) composite bar (SSGCB) was put forward. An optimization plan was proposed in the combined form of SSGCB. The composite principle, material selection, and SSGCB preparation technology have been described in detail. Three-dimensional finite element analysis was adopted to perform the combination form optimization of different steel core structures and different steel core contents based on the mechanical properties. Mechanical tests such as uniaxial tensile, shear, and compressive tests were carried out on SSGCB. Parametric analysis was conducted to investigate the influence of steel content on the mechanical properties of SSGCB. The results revealed that the elastic modulus of SSGCB had improvements and increased with the rise of steel content. Shear strength was also increased with the addition of steel content. Furthermore, the yield state of SSGCB was similar to the steel bar, both of which indicated a multi-stage yield phenomenon. The compressive strength of SSGCB was lower than that of GFRP bars and increased with the increase of the steel core content. Stress-strain curves of SSGCB demonstrated that the nonlinear-stage characteristics of SSGCB-8 were much more obvious than other bars.

关键词： steel sheet GFRP composite bar     combination form     numerical modeling     mechanical properties test     strength    

HTML PDF 收藏

Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological

《机械工程前沿（英文）》 2023年 第18卷 第1期 doi: 10.1007/s11465-022-0720-4

摘要： Aerospace aluminum alloy is the most used structural material for rockets, aircraft, spacecraft, and space stations. The deterioration of surface integrity of dry machining and the insufficient heat transfer capacity of minimal quantity lubrication have become the bottleneck of lubrication and heat dissipation of aerospace aluminum alloy. However, the excellent thermal conductivity and tribological properties of nanofluids are expected to fill this gap. The traditional milling force models are mainly based on empirical models and finite element simulations, which are insufficient to guide industrial manufacturing. In this study, the milling force of the integral end milling cutter is deduced by force analysis of the milling cutter element and numerical simulation. The instantaneous milling force model of the integral end milling cutter is established under the condition of dry and nanofluid minimal quantity lubrication (NMQL) based on the dual mechanism of the shear effect on the rake face of the milling cutter and the plow cutting effect on the flank surface. A single factor experiment is designed to introduce NMQL and the milling feed factor into the instantaneous milling force coefficient. The average absolute errors in the prediction of milling forces for the NMQL are 13.3%, 2.3%, and 7.6% in the x-, y-, and z-direction, respectively. Compared with the milling forces obtained by dry milling, those by NMQL decrease by 21.4%, 17.7%, and 18.5% in the x-, y-, and z-direction, respectively.

关键词： milling     force     nanofluid minimum quantity lubrication     aerospace aluminum alloy     nano biological lubricant    

HTML PDF 收藏

Preparation of copolymer-grafted mixed-mode resins for immunoglobulin G adsorption

Shenggang Chen, Tao Liu, Ruiqi Yang, Dongqiang Lin, Shanjing Yao

《化学科学与工程前沿（英文）》 2019年 第13卷 第1期   页码 70-79 doi: 10.1007/s11705-018-1745-4

摘要： The mixed-mode resins for protein adsorption have been prepared by a novel strategy, copolymer grafting. Specially, the copolymer-grafted resins CG-M-A with two functional groups, 5-amino-benzimidazole (ABI) and methacryloxyethyltrimethyl ammonium chloride (METAC), have been prepared through surface-initiated activator generated by electron transfer for atom transfer radical polymerization of METAC and glycidyl methacrylate (GMA), followed by a ring-open reaction to introduce ABI. The charge and hydrophobicity of CG-M-A resins could be controlled by manipulating the addition of METAC and GMA/ABI. Besides, METAC and ABI provided positive effects together in both protein adsorption and elution: dynamic binding capacity of human Immunoglobulin G (hIgG) onto CG-M-A resin with the highest ligand ratio of METAC to ABI is 46.8 mg·g at pH 9 and the elution recovery of hIgG is 97.0% at pH 5. The separation experiment showed that purity and recovery of monoclonal antibody from cell culture supernatant are 96.0% and 86.5%, respectively, indicating that copolymer-grafted mixed-mode resins could be used for antibody purification.

关键词： atom transfer radical polymerization     copolymer-grafting     mixed-mode resin     protein adsorption    

HTML PDF 收藏

General closed-form inverse kinematics for arbitrary three-joint subproblems based on the product of

《机械工程前沿（英文）》 2022年 第17卷 第2期 doi: 10.1007/s11465-022-0681-7

摘要： The inverse kinematics problems of robots are usually decomposed into several Paden–Kahan subproblems based on the product of exponential model. However, the simple combination of subproblems cannot solve all the inverse kinematics problems, and there is no common approach to solve arbitrary three-joint subproblems in an arbitrary postural relationship. The novel algebraic geometric (NAG) methods that obtain the general closed-form inverse kinematics for all types of three-joint subproblems are presented in this paper. The geometric and algebraic constraints are used as the conditions precedent to solve the inverse kinematics of three-joint subproblems. The NAG methods can be applied in the inverse kinematics of three-joint subproblems in an arbitrary postural relationship. The inverse kinematics simulations of all three-joint subproblems are implemented, and simulation results indicating that the inverse solutions are consistent with the given joint angles validate the general closed-form inverse kinematics. Huaque III minimally invasive surgical robot is used as the experimental platform for the simulation, and a master–slave tracking experiment is conducted to verify the NAG methods. The simulation result shows the inverse solutions and six sets given joint angles are consistent. Additionally, the mean and maximum of the master–slave tracking experiment for the closed-form solution are 0.1486 and 0.4777 mm, respectively, while the mean and maximum of the master–slave tracking experiment for the compensation method are 0.3188 and 0.6394 mm, respectively. The experiments results demonstrate that the closed-form solution is superior to the compensation method. The results verify the proposed general closed-form inverse kinematics based on the NAG methods.

关键词： inverse kinematics     Paden–Kahan subproblems     three-joint subproblems     product of exponential     closed-form solution    

HTML PDF 收藏

Comparison between two commercial uranium resins and a uranyl sulphate imprinted resin based on self-assembling

LIU Yaochi, XU Wei, XU Weijian, LIU Hanmao, ZHANG Xiaowen

《化学科学与工程前沿（英文）》 2007年 第1卷 第4期   页码 327-331 doi: 10.1007/s11705-007-0059-8

摘要： In recent years, resins prepared via molecular imprinting technology have received considerable attention owing to their recognition and selective adsorption. This paper deals with the comparative investigation between a uranyl sulphate imprinted ion-exchange based on self-assembling molecular imprinting technology and two kinds of commercial uranium resins (the medium pore resin D263 and strong base resin 201×7). The studies were focused on their kinetics performance, adaptability toward pH, and performance of saturation and elution in laboratory-scale column. The results show that the imprinted ion exchange resin has the fast kinetics, high adaptability toward pH, and good adsorption and elution performance.

关键词： saturation     molecular imprinting     imprinting technology     adaptability     commercial    

HTML PDF 收藏

Numerical analysis of aluminum alloy reticulated shells with gusset joints under fire conditions

《结构与土木工程前沿（英文）》 2023年 第17卷 第3期   页码 448-466 doi: 10.1007/s11709-022-0910-5

摘要： In this study, a numerical analysis was conducted on aluminum alloy reticulated shells (AARSs) with gusset joints under fire conditions. First, a thermal-structural coupled analysis model of AARSs considering joint semi-rigidity was proposed and validated against room-temperature and fire tests. The proposed model can also be adopted to analyze the fire response of other reticulated structures with semi-rigid joints. Second, a parametric analysis was conducted based on the numerical model to explore the buckling behavior of K6 AARS with gusset joints under fire conditions. The results indicated that the span, height-to-span ratio, height of the supporting structure, and fire power influence the reduction factor of the buckling capacity of AARSs under fire conditions. In contrast, the reduction factor is independent of the number of element divisions, number of rings, span-to-thickness ratio, and support condition. Subsequently, practical design formulae for predicting the reduction factor of the buckling capacity of K6 AARSs were derived based on numerical analysis results and machine learning techniques to provide a rapid evaluation method. Finally, further numerical analyses were conducted to propose practical design suggestions, including the conditions of ignoring the ultimate bearing capacity analysis of K6 AARS and ignoring the radiative heat flux.

关键词： aluminum alloy reticulated shell     gusset joint     numerical analysis     fire resistance    

HTML PDF 收藏

标题 作者 时间 类型 操作

A new regeneration approach to cation resins with aluminum salts: application of desalination by its

Zhigang LIU, Shaomin ZHU, Yansheng LI

期刊论文

Fabrication of form stable NaCl-Al2O3 composite for thermal energy storage by cold sintering process

Bilyaminu Suleiman, Qinghua Yu, Yulong Ding, Yongliang Li

期刊论文

Fluorescence detection of phosphate in an aqueous environment by an aluminum-based metal-organic framework

期刊论文

铝电解用Fe-Ni-Co-Al2O3金属陶瓷惰性阳极

邱竹贤,石忠宁,徐君莉

期刊论文

Separating method and dynamic processes of Nano-Al13

GAO Baoyu, YUE Qinyan, WANG Xiaona, CHU Yongbao, KONG Chunyan

期刊论文

Fatigue and impact analysis and multi-objective optimization design of Mg/Al assembled wheel considering

期刊论文

Utilization of aluminum hydroxide waste generated in fluoride adsorption and coagulation processes for

Jiawei JU,Ruiping LIU,Zan HE,Huijuan LIU,Xiwang ZHANG,Jiuhui QU

期刊论文

Toughening of vinyl ester resins by two-dimensional MXene nanosheets

期刊论文

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes

期刊论文

Combination form analysis and experimental study of mechanical properties on steel sheet glass fiber

期刊论文

Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological

期刊论文

Preparation of copolymer-grafted mixed-mode resins for immunoglobulin G adsorption

Shenggang Chen, Tao Liu, Ruiqi Yang, Dongqiang Lin, Shanjing Yao

期刊论文

General closed-form inverse kinematics for arbitrary three-joint subproblems based on the product of

期刊论文

Comparison between two commercial uranium resins and a uranyl sulphate imprinted resin based on self-assembling

LIU Yaochi, XU Wei, XU Weijian, LIU Hanmao, ZHANG Xiaowen

期刊论文

Numerical analysis of aluminum alloy reticulated shells with gusset joints under fire conditions

期刊论文